Average Reviews:
(More customer reviews)This has better tone than my 500 watt Hartke.
The 2 button foot switch is hooked to useful effects.
I like the Ultrabass set below about 2, and leave it off most of the time. The Shape sounds good on about 5.
I skip the bright and deep, they add more noise than good tone.
Set the gain on 6 for my Fender Jazz with S1 button. The guitars tone controls seem more versatile than with my old amp.
I set output on 2 for practice with lots of punch. Set it on 3 if you want to blow cats across the room, it can play gigs with room to spare. I have it hooked to a Hartke 15VX and an Avatar 2 x 12. The DI out sounds pretty lifeless compared to a mic in front of the speaker for recording and PA. This is a great sounding, high powered amp.
Click Here to see more reviews about:
Behringer BX4500H 450-Watt Bass Amp HeadThe ULTRABASS BX4500H is a massive 450-Watt bass amp head with patented Dynamizer technology, boasting a switchable Ultrabass sub-harmonics processor for unbelievable low-end power and a revolutionary Shape filter for extreme sound range. Since flexibility has become a particularly important factor in the music business over the past few years, modern bass players need to offer a broad range of sounds, but should still be able to play in different kinds of settings at short notice: home recording, studio or live concerts.
This is why you get a complete set of useful functions that are simple enough to be operated intuitively and quickly. An extremely musical 5-band EQ with "Bright" and "Deep" functions gives you the ultimate in tone-shaping. There is an integrated limiter and an active, temperature-controlled cooling system for ultimate protection. You also get a vintage-style VU meter for precise signal level control. A dual footswitch for Ultrabass and Shape functions is included, and there are 3 speaker outputs on 1/4-inch jack and touch-proof connectors compatible with Neutrik Speakon. With this amp, you can certainly rock the stage like a pro.
Patented Dynamizer technology When it comes to amplifying the signals delivered by electric instruments, you've got to separate the wheat from the chaff. Unlike mixed or mastered signals, electric instruments usually deliver extremely high signal peaks which, when raised in gain, produce nasty distortion. How an amplifier responds to these signal peaks can therefore be seen as one of its most essential quality features.
Many manufacturers use limiters preceding the power stage to limit dynamic signal peaks. However, the problem is the preamp, which is why Behringer equipped the BX4500H with unique Dynamizer preamp circuitry that gives you a lively and punchy sound with signal peaks--even if the amp reaches its power limits. Extreme signal peaks are limited effectively while the average level and hence the power of the overall signal is raised. The sound gets more vivid and powerful in character, without any unmusical distortion. With its limiter in the power stage it is virtually impossible to overdrive the ULTRABASS BX4500H.
Shape Function The Shape function on the BX4500H provides a revolutionary type of filter that you can use to modify your bass sound in full detail. Extreme filter settings will give your bass sound more power. For example, if you want to play a live bass solo but the sound doesn't cut through, set up a solid basic sound plus a very distinctive solo sound using the SHAPE filter. Connect your footswitch to control the SHAPE filter and you're all set.
The Shape filter is also handy for using two different bass guitars. Maybe you want to change from a jazz bass to a fretless bass, and vice versa--two instruments with a completely different sound. Use the Shape filter for your fretless sound, and the basic sound for the jazz bass. Problem solved.
Ultrabass Function Extremely low bass sounds playing one octave below the lowest available bass guitar frequency are quite trendy in current music productions. Often, you can do this in studios only, because most bass amplifiers have no sub-harmonics function. Not so with your BX4500H: the ULTRABASS processor gives you the ultimate tool to shape up-to-date sounds.
You'll be surprised how deep your bass can sound with the ULTRABASS function of your BX4500H. Extreme settings can be particularly interesting if you want to give your sound some flavor in the treble range. By the way: when you use the SHAPE filter set to a low cut-off frequency (which is a nice setting for growling sounds), but feel that there's not enough power in the bass range, the sub-harmonics processor will be there to help you: even though the sound is still growling, now it has much more depth.
The ULTRABASS function can easily be switched on and off via the supplied footswitch. This allows you to fine-tune certain passages only.
What's in the Box Behringer BX4500H 450-Watt Bass Amp Head, Power Cable, User's Manual
Get 50% OFF
Click here for more information about Behringer BX4500H 450-Watt Bass Amp Head
